All Accessories
Mudd-Ox accessories allow you to significantly extend the functionality of the already highly-capable base machine, improve your comfort in extreme climatic conditions or simply suit to your personal style. All accessories are available individually and whilst some are best fitted at time of manufacture, the majority can be fitted at any time thereafter. If you cannot find an accessory you need, or have questions regarding multiple accessories being fitted together, please contact us.
Financing
All accessories can be financed with the purchase of a new Mudd-Ox vehicle.
Description Legend
AT = Amphibious Trailer
VEN = Vengeance
XL = XL
FM = Fort Mac
A/C Unit
Starting at $74 per month
Retail: $4,495
Factory Install: $200
Fits: VEN40, XL, FM
Description: Yes, the a/c blows cold! This rooftop unit will provide cool air conditioning even in extremely humid climates. Adds 9.5” to height of the cab.
*Requires our Cab – Aluminum
A/C Unit Brush Guard
Starting at $7 per month
Retail: $395
Factory Install: $50
Fits: VEN40, XL, FM
Description: For those who run an A/C unit while in trails, we recommend this brush guard to protect from tree branches and other obstacles.
*Requires our A/C Unit
Alternator Upgrade
Starting at $7-8 per month
Retail: $495 (60 amp fits VEN23, VEN31)
Retail: $495 (105 amp fits VEN40, XL40)
Factory Install: $50
Description: Increased charging system for those with additional accessories that draw electrical current, such as lights.
Amphibious Trailer Skid Plate
Starting at $15 per month
Retail: $895
Factory Install: $100
Fits: AT
Description: The Amphibious Trailer Skid Plate adds an additional layer of protection against the terrain such as rocks, logs and sharp objects. It extends under the entire trailer as well as partially up each side. Made of HMWPE plastic and is identical to the skid plate standard on all Mudd-Ox vehicles.
Automatic Chain & Bearing Lubrication System
Starting at $74 per month
Retail: $4,495
Factory Install: $500
Fits: VEN, XL
Description: This accessory will automatically grease all axle bearings and lubricate all chains in the Mudd-Ox. It’s fully programable with lubrication intervals, diagnostic history, low level alerts and even a mobile app for monitoring the system. Significantly cut your maintenance and repair costs by automatically suppling grease to critical components whenever it’s needed, not when a technician has the free time.
Auxiliary Hydraulics
Retail: Varies
Factory Install: Varies
Fits: XL, FM
Description: Fully customizable auxiliary hydraulic system built to order. Can be used to power drills, 3-point hitches, shears, brush cutters, auger etc.
Options: Various mounting locations possible. Please contact us for custom ordering.
*Must be ordered at time of build.
Auxiliary Switch Panel
Starting at $3 per month
Retail: $195
Factory Install: $100
Fits: VEN, XL, FM
Description: A standalone switch panel for those with additional accessories. Panels are backlit for visibility at night.
Options: Standard panels range from one to five quantity switches, and additional quantities can be requested. We offer momentary, maintained, and blank switches. Momentary requires the user to hold a switch in its position to activate the accessory, such as a car horn. Maintained switches are activated and remain in their position, such as headlights. Blanks have wiring pre-installed, but are placeholders and do not function.
Bearing Extension Kit
Starting at $16 per month
Retail: $995
Factory Install: N/A
Fits: VEN
Description: This kit adds a third bearing to each axle, providing additional support. Commonly used with dual wheels and tracks. Standard on XL models.
*Must be ordered at time of build. If ordered after, factory install costs may increase.
Bearing Grease Zerk Convenience Relocation Kit
Starting at $8-16 per month
Retail $495: (12 Bearings – fits AT)
Retail $695: (16 Bearings – fits VEN without optional Bearing Extension Kit)
Retail $995 (24 Bearings – fits VEN with optional Bearing Extension Kit, XL)
Factory Install: $100
Description: Each axle has bearings that require grease after driving through water and mud, or every 25 hours of run time – whichever comes first. This kit relocates all the grease zerks to a central location for both the inside and outside bearings, making maintenance that much easier.
*Must be ordered at time of build. If ordered after, factory install costs may increase.
Brush Cage
Starting at $38-41 per month
Retail: $2,295 (Half body length – fits VEN, XL)
Retail: $2,495 (Full body length – fits VEN, XL, FM)
Factory Install: $50
Description: This aluminum cage is designed to help protect occupants while traversing through areas with tree limbs and brush. The front screen section is removable. Our half body length ends just past the roll bar, while the full body length extends to the rear of the vehicle.
Options: Available colors Ox Black/Ox Green/Ox Red. Front screen is always Ox Black. Can be used alongside our Windshield.
Brush Guard
Starting at $7 per month
Retail: $395
Factory Install: $50
Fits: VEN, XL, FM
Description: An absolute customer favorite and our most fitted accessory. This brush guard is designed to help protect both the headlights and front winch on the Mudd-Ox from tree limbs and brush. Adds 4” to total vehicle length.
Cab – Aluminum
Starting at $66 per month
Retail: $3,995
Factory Install: $100
Fits: VEN, XL, FM
Description: A hardtop cab to keep occupants safe from weather conditions. Standard with interior carpet, sliding windows and fully removable doors. Adds 1” to height.
Options: Front or rear hinged doors. Available colors Ox Black/Ox Green/Ox Red.
Other Accessory Options: A/C Unit, Cab – Stereo, and Windshield Wiper. Please see individual accessory item descriptions for vehicle compatibility.
Cab – Canvas (Full/Half Combo Kit)
Starting at $33 per month
Retail: $1,995
Factory Install: $100
Fits: VEN, XL
Description: Our canvas cab is completely convertible – transforming from a half cab to a full cab within minutes. Users have the flexibility to use their tops in a variety of styles: half cab, full cab, windows down, or windows rolled up.
*Requires our Windshield
Cab – Canvas (Rear Enclosure)
Retail:995
Factory Install: $100
Fits: VEN, XL
Description: This rear enclosure is designed to fit with the combination of our Cab – Aluminum and Safari Rack. It provides weather protection for occupants and cargo in the rear section.
*Requires our Cab – Aluminum and Safari Rack
Cab – Stereo Kit
Starting at $13 per month
Retail: $795
Factory Install: $100
Fits: VEN, XL, FM
Description: Full system with head unit. Features: AM/FM, Bluetooth, USB, AUX, MP3, WMA music formats.
*Requires our Cab – Aluminum
Cargo Liner
Starting at $7 per month
Retail: $395
Factory Install: N/A
Fits: VEN, XL
Description: This plastic cargo liner is ideal for users who are hauling equipment, small items, and recently hunted game inside the machine. It keeps the mess to a minimum, and is quickly removable for cleaning purposes.
Cargo Platform
Starting at $12 per month
Retail: $695
Factory Install: N/A
Fits: VEN, XL
Description: This aluminum cargo platform sits over the top of the passenger seats. It has handles for quick removal.
Options: Available colors Ox Black/Ox Green/Ox Red. Standard and Rear Fuel Fill cutout.
Chain – Heavy Duty Upgrade
Starting at $16 per month
Retail: $995
Factory Install: N/A
Fits: VEN
Description: Standard Vengeance models use single-sized chain on the transmission and rear four axles. This kit upgrades the chain to double-size for additional strength and longevity.
*Must be ordered at time of build. If ordered after, factory install costs may increase.
Color – Custom
Retail: Varies on color and quantity of machines ordered.
Factory Install: N/A
Fits: AT, VEN, XL, FM
Description: Custom body color for Mudd-Ox. Great for companies who color coordinate their fleets, or those who want a unique build. Both standardized colors and paint code matching available.
Options: Upper body, lower body, skid plate, engine cover in custom colors.
*Must be ordered at time of build.
Controls – Steering Wheel
Starting at $83 per month
Retail: $4,995
Factory Install: N/A
Fits: XL57, FM
Description: Transforms the Mudd-Ox from the traditional dual levers to automotive style steering wheel with gas and brake pedal. Each component has been electronically tuned for ease of driveability in all types of terrain, with a selectable low and high range.
*Must be ordered at time of build
Dump Bed
Starting at $58 per month
Retail: $3,495
Factory Install: $100
Fits: VEN, XL
Description: The dump bed is simple to use with a push-button on the dash for raising and lowering. Great for utility work, farms, and recreation.
Options: Available colors Ox Black/Ox Green/Ox Red.
Engine Remote Oil Drain
Starting at $2 per month
Retail: $95
Factory Install: N/A
Fits: VEN, XL, FM
Description: As the OEM engine drain plug is near the Mudd-Ox frame, draining can become a mess. This kit replaces the plug with an auxiliary hose and valve system for clean, controlled oil changes.
*Must be ordered at time of build. If ordered after, factory install costs may increase.
Fender Kit
Starting at $3 per month
Retail: $195
Factory Install: $50
Fits: VEN, XL, FM
Description: Our fender kit extends the Mudd-Ox body, serving as a guard from mud and water. Commonly used with dual wheels and tracks. Total 72” wide.
Float – Catwalk
Starting at $50 per month
Retail: $2,995
Factory Install: $250
Fits: VEN, XL, FM
Description: The catwalk meets the needs of a diverse range of occupations. It extends around the vehicle, allowing for individuals to walk between passenger areas. It’s commonly used as a work/inspection platform for utility companies, muskrat hunters, photographers, cinema, and those who want additional stability in the water. Adds 9” to length, and total 82” wide.
Options: Available colors Ox Black/Ox Green/Ox Red.
Float – Front
Starting at $25 per month
Retail: $1,495
Factory Install: $100
Fits: VEN, XL, FM
Description: This front float provides additional stability in the water. Adds 15” to length. Total 69” wide.
Options: Available colors Ox Black/Ox Green/Ox Red.
Fuel Fill – Rear
Starting at $3 per month
Retail: $195
Factory Install: N/A
Fits: VEN, XL, FM
Description: Changes the fuel fill from the driver side of the Mudd-Ox to the rear.
*Must be ordered at time of build.
Heater w/ Defrost
Starting at $16 per month
Retail: $995
Factory Install: $200
Fits: VEN25, VEN31, XL57, FM
Description: Automotive heavy duty style heater with defrosting. Air vents can be aimed wherever occupants desire. This kit can be used both with and without optional cabs. Deletes the glove box.
*Must be ordered at time of build
Light Bar
Starting at $3-6 per month
Retail: $175 (10″ wide)
Retail: $225 (20″ wide)
Retail: $275 (30″ wide)
Retail: $325 (40″ wide)
Retail: $375 (50″ wide)
Factory Install: $50
Fits: VEN, XL, FM
Description: Illuminate your surroundings on the darkest of nights. Perfect for hunting, construction, and utility work.
Options: Mounts available for sides, Brush Guard, Cab – Aluminum, Rear Roll Bar, Safari Rack. We can custom mount lights to any accessory or location you desire.
*Requires our Auxiliary Switch Panel.
Outboard Motor
Starting at $2-91 per month
Retail: $5,495 (Complete kit)
Retail: $145 (Mount only – standard)
Retail: $195 (Mount only – offset)
Factory Install: $100 for complete kit only
Fits: VEN, XL, FM
Description: This is the ultimate outboard motor kit with a 9.9 hp 4-stroke engine. It features full remote controls. Operators can power tilt up/down, side to side, start/shut off, and control engine throttle all from the operator’s seat. The motor mounts into the rear hitch receiver of the Mudd-Ox for quick install and uninstall.
Options: We offer two different mounting styles. Standard – this places the engine directly in the middle of the Mudd-Ox. Offset – this places the engine towards the passenger side of the Mudd-Ox for use alongside our optional Winch – Rear Mount.
Rear Accessory Carrier – Main Mount
Starting at $3 per month
Retail: $195
Factory Install: N/A
Fits: VEN, XL, FM
Description: The Rear Accessory Carrier is a highly versatile item that can be produced with multiple configurations. Made with removable sections, operators can mix and match desired accessories. Provides additional room for cargo.
Options: Works in conjunction with our Amphibious Trailer, Winch – Rear, and Spare Carriers.
Rear Seat – Standard
Starting at $7 per month
Retail: $395
Factory Install: $50
Fits: VEN, XL, FM
Description: Provides additional occupant seating in the rear of the Mudd-Ox.
Rear Seat – Bench
Starting at $10 per month
Retail: $595
Factory Install: $100
Fits: VEN, XL
Description: Provides additional occupant seating in the rear of the Mudd-Ox. Bench style with full frame.
*For use with seat belts, requires our Twin Roll Bar
Rescue
Retail: Varies
Fits: AT, VEN, XL, FM
Description: Fully custom rescue units built to order with a wide range of possibilities. The Mudd-Ox pictured is specific to fire fighting. It has an aluminum platform with seating for two, additional to the standard front seating. Below the platform is a water tank which connects to both a hose reel and sprinklers. Sprinklers spray constant water over the tracks to keep them cool while traversing over hot terrain.
Options: Please contact us for custom ordering.
Safari Rack
Starting at $28-33 per month
Retail: $1,995 (Full body length, rub rail mount fits AT, VEN, XL, FM)
Retail: $1,895 (Full body length, roll bar mount fits AT, VEN, XL, FM)*
Retail: $1,795 (Half body length, rub rail mount fits AT, VEN, XL, FM)
Retail: $1,695 (Half body length, roll bar mount fits VEN, XL, FM)*
Factory Install: $50
Description: The safari rack allows users to store cargo above the vehicle. This provides additional room inside the vehicle for cargo and occupants. A guard rail surrounds the safari rack to serve as a tie-down point for cargo. Adds 4” to VEN/XL height, and 5” to FM. AT height varies.
Options: Available colors Ox Black/Ox Green/Ox Red. Styles include full and half body lengths, and mounted on either roll bar or rub rail.
*Roll bar mount safari racks require our Twin Roll Bar.
Snow Plow – 85″
Starting at $33 per month
Retail: $1,995
Factory Install: $50
Fits: VEN, XL, FM
Description: This is a straight blade plow designed in-house. The front winch is connected to the plow, providing power up/down of the blade from directly in the operator’s seat. Side to side tilt is set by a lever outside the vehicle. Total 85” wide. Adds 25.5” length with blade up, 27.5” blade down.
Snow Plow – Boss Power V-Blade
Starting at $91 per month
Retail: $5,495
Factory Install: $150
Fits: VEN, XL, FM
Description: The V-Blade plow provides ultimate versatility. Each direction of the plow is controlled directly from the operator’s seat including up/down, side to side, and blade configuration. In the center section of the blade is a hinge. This allows for unlimited angles ranging from a straight blade to a “V” shape.
Spare Carrier
Starting at $3-4 per month
Retail: $225 (Attachment 5 gallon fuel can w/can)
Retail: $195 (Attachment tire w/o tire)
Factory Install: N/A
Fits: VEN, XL, FM
Description: These attachments go alongside the Rear Accessory Carrier or Winch – Reat Mount. The spare tire attachment allows the use of mounting a tire/wheel combo onto the carrier. Fuel can attachment offers spare 5 gallons to carry on the trail. Great for those who travel long distances or to remote areas.
*Requires Rear Accessory Carrier – Main Mount or Winch – Rear Mount.
Tire – Vendetta on Beadlock Rim
Starting at $5 per month
Retail: $320
Factory Install: N/A
Fits: AT, VEN, XL, FM
Description: The 26 x 14 x 12″ Vendetta tire is our own creation. Each aspect of the tire was designed specifically for ultimate amphibious ATV performance. Sidewalls are strong for off-road use, while also flexible for superior ride quality. The V-tread paddles through water and mud. Tire comes mounted on our 12″ beadlock rim.
Tire – Dual Wheel Kit
Starting at $41-55 per month
Retail: $3,320 (8×8 fits VEN, XL)
Retail: $2,490 (6×6 fits AT)
Factory Install: N/A
Description: Our dual wheels provide several benefits to the Mudd-Ox. Foremost, they decrease the overall footprint the vehicle has on the ground. This essentially makes it “float” across soft terrains such as mud, snow and swamp. It also makes the Mudd-Ox extremely stable in the water.
Tool Box
Starting at $5 per month
Retail: $295
Factory Install: $25
Fits: VEN, XL, FM
Description: A weatherproof storage solution for tools and other necessities. Includes a locking latch for security. We offer two different styles: Fuel tank mount with dimensions of 30x8x12″, or side mount on the Float – Catwalk with dimensions 35x8x12″.
*Side mount requires our Float – Catwalk.
Tracks – 16″ Wide Adair
Starting at $88 per month
Retail: $5,295
Factory Install: $100
Fits: VEN, XL
Description: Adair tracks are excellent for mud and water use thanks to an open tire design. They are lightweight and turn well in tall, dry grass. As these are plastic and not rubber, they will not climb slippery hard surfaces.
Tracks – 20″ Wide Chevron
Starting at $99 per month
Retail: $5,995
Factory Install: $100
Fits: VEN, XL standard on FM
Description: Chevron is the best overall track for use in all types of terrain as its made of rubber, although requires more horsepower to turn due to pure traction and weight. Total 82” wide.
Tracks – 20″ Wide Ripsaw
Starting at $74-96 per month
Retail: $4,495 (6×6 – Fits AT)
Retail: $5,795 (8×8 – Fits all VEN, XL)
Factory Install: $100
Description: The Ripsaw is a snowmobile style tread. Lightweight and nimble ability allows for better turning in tall, dry grass conditions. Works well in snow. Total 80” wide.
Tracks – 21″ Wide Beaver Dam
Starting at $99 per month
Retail: $5,995
Factory Install: $100
Fits: VEN, XL, FM
Description: A highly aggressive track for uses in all types of terrain, however are best fit in extreme swamp conditions. Water grabbing paddle tracks are made of 50% UHMW and 50% hardened steel. Requires more horsepower to turn due to pure traction and weight. Please note these tracks will tear up the ground whether it’s swamp or pavement. Total 88″ wide.
Transport Tie Downs
Starting at $2 per month
Retail: $95 (Bearing Flange Style – Fits AT, VEN)
Retail: $95 (Bearing Box Style – Fits VEN*, XL)
Factory Install: N/A
Description: Properly transporting your Mudd-Ox is important. Our tie downs bolt directly to the chassis for strength and safety. This makes connecting tie downs very quick and easy.
*VEN requires our Bearing Extension Kit
Twin Roll Bar – Amphibious Trailer
Starting at $8-32 per month
Retail: $1,955 (Complete kit)
Retail: $495 (Frame prep only)
Factory Install: N/A
Fits: AT
Description: Twin roll over protection system (ROPS), one per each end of the trailer. Great for protecting cargo, or providing additional room alongside our optional Safari Rack. This is mounted directly to the frame and can be folded down for ease of transport. Complete kit comes with all components. Frame prep only includes necessary upgrades to the trailer frame, and the roll bar itself may be purchased and installed anytime after.
*Must be ordered at time of build. Twin Roll Bar requires frame upgrades that cannot be completed after trailer assembly.
Twin Roll Bar
Starting at $8-32 per month
Retail: $1,955 (Complete kit)
Retail: $495 (Frame prep only, standard on FM)
Factory Install: N/A
Fits: AT, VEN, XL, FM
Description: An additional roll over protection system (ROPS) on the rear of the vehicle. This is mounted directly to the frame and can be folded down for ease of transport, identical to the standard ROPS in the middle of the vehicle. Complete kit comes with all components. Frame prep only includes necessary upgrades to the Mudd-Ox frame, and the roll bar itself may be purchased and installed anytime after.
*Must be ordered at time of build. Twin Roll Bar requires frame upgrades that cannot be completed after vehicle assembly.
Winch – Synthetic Rope Upgrade
Starting at $2 per month
Retail: $95
Factory Install: N/A
Fits: VEN, XL, FM
Description: Standard winches come with a steel cable. The synthetic rope upgrade is lighter and more user friendly, and does not develop sharp burrs like steel. It stores less potential energy. Available for both standard front winch and optional Winch – Rear Mount.
Winch – Rear Mount
Starting at $16 per month
Retail: $995 (Standard rear mount)
Factory Install: $100
Fits: VEN, XL, FM
Description: Sometimes you just need a winch on the rear for vehicle recovery. This system is quick connect, allowing for near instant install and uninstall. Comes with 5,000 lbs. winch with steel cable. Adds 8″ to length.
Options: Synthetic Rope upgrade for the winch is available for $95.
Windshield
Starting at $16 per month
Retail: $995
Factory Install: $100
Fits: VEN, XL, FM
Description: The windshield can be used as a standalone accessory, alongside our Brush Cage, or Cab – Canvas. Quickly installs and uninstalls.
Options: Windshield – Wiper Kit is available for $345 with factory install $100.
Windshield – Wiper Kit
Starting at $6 per month
Retail: $345
Factory Install: $100
Fits: VEN, XL, FM
Description: Electric windshield wiper kit with single blade. This allows operators better visibility in foggy and rainy conditions.
*Requires our Windshield or Cab – Aluminum.